Scotty Cameron · Putters Review
Scotty Cameron Super Select Newport 2 Putter Review
The iconic squared blade, dual-milled and refined.
Excellent
Tour Issue Score 8.8 · Ranked #20 of 38 in Putters
Best for: Better putters with a slight-to-moderate arc who value milled feel, feedback and a classic squared blade shape over mallet-style stability.
The Bottom Line
The iconic squared blade, dual-milled and refined.. The Scotty Cameron Super Select Newport 2 Putter scores 8.8 out of 10 in our research-based review, a excellent mark that puts it at #20 of 38 Putters in our rankings. Its strongest fit: Better putters with a slight-to-moderate arc who value milled feel, feedback and a classic squared blade shape over mallet-style stability..
Full Review
The Short Version
The Super Select Newport 2 is Scotty Cameron's flagship blade: the squared-off, heel-and-toe weighted shape that has been in tour bags for decades, refined for this generation with dual-milled face technology, an I-beam plumbing neck and customizable tungsten sole weighting. It is milled in the USA from 303 stainless steel and priced at $450. Published reviews from Golf Digest and others treat it as an exercise in small, compounding improvements to a proven shape rather than a reinvention, which, for the golfers who buy Newport 2s, is precisely the point.
Performance
Performance in a blade putter means starting the ball on line with predictable speed, and the Super Select's changes target both. The dual-milled face is the headline: a first, deep-milling-inspired pass creates the soft impact character Cameron blades are known for, and a second pass levels the grooves, aiming for the more consistent roll and feedback associated with mid-milled faces. Golf Digest's assessment credited the new milling pattern with achieving that traditional soft feel alongside mallet-like roll consistency. The I-beam neck is functional as well as visual, sculpting mass out of the neck lets Cameron push weight toward the heel and toe, and the sole weights scale with length (two 40-gram weights at 33 inches, 35-gram at 34, 30-gram at 35) to keep swing weight in the intended window. The tri-sole design helps the putter sit square through the setup. None of this fixes a bad read, but reviewers consistently describe a pure, repeatable roll when the stroke delivers the face square.
Forgiveness
Forgiveness is the honest limitation of any Newport-shaped blade, and the Super Select improves it only within that constraint. Cameron milled additional room for the heel and toe weights to increase stability on off-center hits, and Golf Digest specifically noted that change as a forgiveness gain. The perimeter effect is real: slight misses hold their line better than on older, lighter-tailed blades. But the head is compact, there is no mallet-sized moment of inertia behind it, and a strike well toward the toe will still twist, lose speed and miss. Golfers whose contact pattern is scattered, or who putt best with a high-stability mallet or a zero-torque design, should take that seriously. Within the blade category, though, the weighting package is as thoughtful as it gets, and the Plus models in the same line, with wider bodies and aluminum sole plates, exist for blade lovers who want a little more help.
Feel and Sound
Feel and sound are why this putter sells. The 303 stainless head and dual-milled face produce the soft-but-defined impact sensation that reviewers describe as the classic Cameron feedback: a muted, solid click that tells you exactly where on the face you caught it without ringing or feeling harsh. Center strikes feel dense and quiet; mishits sharpen slightly, which better putters count as information rather than a flaw. The textured Pistolini Plus grip is smaller in the upper hand with more substance low, supporting a light, responsive grip pressure. Golfers coming from insert putters will find the all-milled face firmer and more communicative; golfers coming from older deep-milled Camerons will find it familiar, with a touch more consistency in how the ball leaves the face.
Value
At $450 the Newport 2 sits at the top of the mainstream putter market, level with other premium milled blades and well above high-performing cast and insert models that cost half as much. The value argument is not strokes-per-dollar, no honest review can promise that, it is build quality, materials, fitting-relevant options (three lengths, left-handed availability, interchangeable weights), Cameron's studio craftsmanship and historically strong resale values that soften the real cost of ownership. Against that, a golfer who putts equally well with a $250 blade is paying for refinement and feel, not function. Golf Digest kept the Super Select line on its Hot List, which reflects the consensus: expensive, and excellent at what it is.
Who Should Buy It
Buy the Super Select Newport 2 if you putt with a slight arc, prefer a blade's look and feedback, strike the middle of the face most of the time, and expect to keep a putter for years. It is also the right pick for Cameron loyalists upgrading from Special Select who want the dual-milled face and I-beam neck. Look elsewhere if you need maximum forgiveness, prefer face-balanced or zero-torque stability, like a soft insert feel, or are still changing your stroke, a more stable mallet will serve a developing stroke better and cost less. As with any $450 putter, roll it against your current gamer on real greens before committing.
Verdict
The Super Select Newport 2 is the definitive modern blade: iconic squared shaping, USA-milled 303 stainless construction, a dual-milled face that balances softness with roll consistency, and weighting that quietly adds stability without changing what a Newport is. Its limits are the category's limits, price and blade forgiveness, stated plainly. For the arcing-stroke player it is built for, few putters feel this good or hold their appeal this long. This is a research-based review synthesized from published reviews, independent test data, and manufacturer specifications; no personal testing was conducted.
What We Like
- Precision milled in the USA from 303 stainless steel with the iconic Newport 2 squared blade shaping and tri-sole design
- Dual-milled face pairs the softness associated with deep milling with a second leveling pass for the consistency of a mid-mill
- New I-beam plumbing neck removes mass from the neck and redistributes it to heel and toe for improved balance
- Customizable tungsten sole weights (paired 40g, 35g or 30g by length) tune swing weight and stability
- Mid toe flow and full-shaft offset suit a straight-to-slight-arc stroke, the most common better-player pattern
- Textured Pistolini Plus grip, premium headcover and strong long-term resale typical of the Cameron line
What to Consider
- $450 premium pricing buys craftsmanship and resale strength, not a measurable scoring guarantee
- Blade forgiveness is inherently limited versus mallets, heel and toe misses lose speed and direction faster
- Mid toe flow suits an arcing stroke; straight-back-straight-through putters may fight the rotation
- No insert or high-MOI technology for golfers who want maximum stability or a softer polymer feel
- Popular lengths and left-handed models can be harder to find at retail
Specifications
| Head | Milled 303 stainless steel blade, tri-sole design, I-beam plumbing neck, mid toe flow |
|---|---|
| Loft / Lie | 3.5 degrees loft, 70 degrees lie, full-shaft offset |
| Lengths / Weights | 33, 34 and 35 inches; tungsten sole weights 2 x 40g (33 in), 2 x 35g (34 in), 2 x 30g (35 in) |
| Face | Dual-milled face technology, deep-mill softness with a second leveling pass for consistency |
| Grip | Textured Pistolini Plus grip; headcover included; left-handed model available |
Score Breakdown
Scores are research-based, drawn from manufacturer specs, tour adoption, and published independent test data. How we score