PING · Putters Review
PING PLD Milled Putter Review
Four hours on the mill: tour PING shapes in fully milled 303 stainless
Excellent
Tour Issue Score 8.9 · Ranked #12 of 38 in Putters
Best for: Feel-focused putters, especially slight-arc and straight-stroke players, who want a fully milled tour putter with classic PING shapes
The Bottom Line
Four hours on the mill: tour PING shapes in fully milled 303 stainless. The PING PLD Milled Putter scores 8.9 out of 10 in our research-based review, a excellent mark that puts it at #12 of 38 Putters in our rankings. Its strongest fit: Feel-focused putters, especially slight-arc and straight-stroke players, who want a fully milled tour putter with classic PING shapes.
Full Review
The Short Version
PING's PLD Milled line takes the putters built in its Putting Lab Design program for tour staff, players such as Viktor Hovland and Tony Finau, and sells them as stock models. Each head is fully machined from a solid block of forged 303 stainless steel in a process PING says requires more than four hours of milling time. The current family spans the Anser 30 and heavier Anser 4D blades, the wider Kushin blade for straight strokes, and the DS72 mid-mallet, at $485. Golf Digest awarded the line Hot List Gold, citing a shallow milling pattern that keeps impact responsive while retaining a soft feel. This is a putter bought for craftsmanship and feel first.
Performance
Performance in a milled putter is consistency of roll and speed control, and the PLD Milled family approaches it through precision rather than technology stacks. There is no insert and no adjustable weighting system in the standard models: the performance claim is that a head machined to tight tolerances, with heel-and-toe ballasting in the Anser tradition Karsten Solheim patented in the 1960s, starts the ball on line repeatably. Published evaluations place the line in the top tier for performance among blade putters, and the model range lets the stroke choose the tool, the Anser 30 at 355 grams for slight-arc players, the 365-gram Anser 4D with a wider sole for stronger arcs, the face-balanced DS72 mid-mallet at 365 grams for straight strokes, and the perimeter-weighted Kushin, also 355 grams, which PING positions as a blade with mallet-like MOI for its size.
Forgiveness
Forgiveness is the honest trade-off in this family. These are blades and a mid-mallet, not high-MOI mallets, and PING does not publish MOI figures for them. Heel-toe weighting helps, the Kushin's wider body and perimeter weighting and the Anser 4D's extra mass and wider sole are explicitly designed to add stability over a narrow traditional blade, but a mishit toward the toe will still lose more speed and line than it would with a modern spider or fang mallet. Golfers whose strike pattern wanders should try the DS72, the most forgiving shape here, or accept that the PLD Milled line prioritizes feedback: you will know exactly where on the face you struck it, which better putters count as a feature.
Feel and Sound
Feel is the reason this line exists. Select models use a shallow-milled face that PING describes as delivering a firmer feel and consistent ball speeds, while others use a deep AMP (Aggressive Milling Pattern) face for a softer impact, both machined directly into the steel, with no insert between face and ball. Golf Digest's testers described the shallow milling as creating a more responsive impact while maintaining a soft feel, a combination milled-putter players prize. The sound is the clean, solid tick of steel on urethane rather than the muted thud of an insert putter.
Value
At $485, the PLD Milled putters cost more than almost any mass-market putter and sit alongside other fully milled premium lines. The value argument is manufacturing time and material: a forged 303 stainless billet, four-plus hours on a CNC mill, tour-derived shapes, and durable finishes. Against that, the line offers no adjustability in stock form, and PING sells the full bespoke route, PLD Custom, with a fitting and one-off build, at $1,290, which frames the Milled line as the accessible tier of the same program. Golfers who cannot feel the difference between milled and cast heads will find better value elsewhere; golfers who can will consider $485 the going rate for this class.
Who Should Buy It
Buy a PLD Milled if you prefer blades or compact mid-mallets, value direct feedback at impact, and want a classic PING shape built to tour tolerances, the Anser variants for arc strokes, the Kushin or DS72 for straighter strokes. It suits confident putters and low-handicappers who read their mishits and adjust. Look elsewhere if you need maximum forgiveness on off-center strikes, if you prefer the soft, quiet launch of an insert, or if your budget tops out below the premium milled tier, where PING's own Scottsdale line covers similar shapes for considerably less.
Verdict
The PLD Milled family is PING doing the oldest thing in its history, the Anser, to the highest modern standard: fully milled, tour-shaped, and unapologetically focused on feel over forgiveness. It will not rescue a wandering strike, but in the hands of a committed blade or mid-mallet player it is as satisfying a putting instrument as the stock market offers. Recommended, with the fitting caveat noted above. This is a research-based review synthesized from published reviews, independent test data, and manufacturer specifications; no personal testing was conducted.
What We Like
- Fully machined from forged 303 stainless steel with more than four hours of milling per head for true precision-milled quality
- Tour-derived shapes from PING's Putting Lab Design program, including the Anser family, DS72 mid-mallet and wider Kushin blade
- Two face options cover feel preferences: shallow-milled for a firmer, responsive strike and deep AMP milling for a softer impact
- Golf Digest Hot List Gold winner, praised for responsive impact with a soft underlying feel
- Clean, premium finishes and alignment details with no inserts or gimmicks, just milled steel
What to Consider
- $485 family pricing is firmly in boutique territory, and the $1,290 PLD Custom experience sits far above it
- Blade and mid-mallet shapes offer far less MOI and mishit protection than modern high-MOI mallets
- Firmer shallow-milled models give unflinching feedback that can feel harsh to insert-putter players
- Model, hosel and face choices are numerous enough that buying without understanding your stroke type is a real risk
Specifications
| Construction | Fully CNC-milled from forged 303 stainless steel; more than four hours of milling per head |
|---|---|
| Face | Shallow-milled face on select models for firmer feel; deep AMP (Aggressive Milling Pattern) face on others for softer feel |
| Loft and Lie | Loft 3 degrees; lie angle 20 degrees (PING specification, adjustable range varies by model) |
| Models and Head Weights | Anser 30 355g (slight arc), Anser 4D 365g (strong arc), Kushin 355g (straight), DS72 365g mid-mallet (straight) |
| Program | Putting Lab Design (PLD) line derived from tour staff putters; Hot List Gold, Golf Digest |
| Shaft and Grip | Chrome or black chrome stepless steel shafts by model; PLD Tour M pistol grip with gold paint fill |
Score Breakdown
Scores are research-based, drawn from manufacturer specs, tour adoption, and published independent test data. How we score