TaylorMade · Wedges Review
TaylorMade Hi-Toe 5 Wedges Review
The big toe wedge goes forged, with full face spin for open face shots
Very Good
Tour Issue Score 8.6 · Ranked #21 of 27 in Wedges
Best for: Mid handicappers and creative short game players who strike wedges toward the toe or open the face often, especially as a sand and lob wedge
The Bottom Line
The big toe wedge goes forged, with full face spin for open face shots. The TaylorMade Hi-Toe 5 Wedges scores 8.6 out of 10 in our research-based review, a very good mark that puts it at #21 of 27 Wedges in our rankings. Its strongest fit: Mid handicappers and creative short game players who strike wedges toward the toe or open the face often, especially as a sand and lob wedge.
Full Review
The Short Version
Hi-Toe 5 is the fifth generation of TaylorMade's tall toe wedge, and the change that matters most is construction: for the first time the head is forged from soft carbon steel, bringing the line into the same forged family as the MG5. It keeps everything that defines a Hi-Toe, the expanded toe, the high center of gravity, full face grooves in the higher lofts and the Aged Copper finish, and adds saw milled grooves and a wider grind menu. GOLF.com describes it as TaylorMade completing its forged wedge family, and that framing is accurate: this is a feel upgrade to a proven specialty shape, priced at $199.99.
Performance
TaylorMade says the double cavity, high toe shape produces the highest center of gravity of any wedge it has made, a design intended to lower flight and add spin control on scoring shots. The grooves are saw milled with steeper walls and sharper edges, and on the 54 through 60 degree lofts they run heel to toe across the whole face, so a strike that drifts toward the toe, the natural miss when the face is opened, still meets groove edges. The RAW face and Spin Tread technology, a pattern of laser etched micro channels, are designed to move moisture away from the contact point. Early independent testing is positive but small in scale: Golf Monthly measured over 7,600 rpm on a 50 yard pitch with the 54 degree wedge, Today's Golfer rated performance at the top of its scale, and Plugged In Golf reported quick stopping spin in morning dew while noting that feel fades away from center.
Grinds and Fitting
Five grinds structure the line. ATS is the all rounder with four way camber, offered in every loft from 50 to 60 degrees. ATV uses a concave sole that plays with more bounce square and less bounce open, in 58 and 60 degrees. ATX adds a wider sole with three ledges for stability, also in 58 and 60. ATW is the widest sole and highest bounce at 14 degrees, in 56 and 60, and is the obvious bunker choice for steep swings and soft sand. ATC is the lowest bounce option at 8 degrees, but it is custom and MyHi-Toe only. GOLF.com makes a practical point worth following: TaylorMade itself suggests pairing a conventional MG5 in the lower gap lofts and using the Hi-Toe where its extra face area earns its place, in the sand and lob slots.
Feel and Forgiveness
Forging is the story reviewers agree on. Today's Golfer and Golfalot both credit the carbon steel head with a softer, more responsive strike than earlier Hi-Toe models, while Plugged In Golf offers the useful caveat that it is pleasant rather than the softest wedge available. Forgiveness is the shape's reason to exist: the larger face, extra toe height and full face grooves give a bigger usable hitting area than a traditional blade, which is why Golfalot still found the bigger head less confidence inspiring on full shots. This is a greenside tool first and a full swing club second.
Value
At $199.99 the Hi-Toe 5 sits at the standard premium wedge price for 2026, level with Cleveland RTZ 2 and Vokey. The premium is easier to justify than before because forging, saw milled grooves and five grinds are substantive changes, not a finish refresh. The value leak is at the edges: the grind many firm course players will want, ATC, requires a custom order, and full MyHi-Toe personalization pushes the price to $249.99.
Who Should Buy It
Buy the Hi-Toe 5 as a 56, 58 or 60 degree specialist if you play flop and bunker shots with an open face, miss toward the toe, or simply like a larger face behind the ball. Steep swingers should start with ATW or ATS, shallow players with ATV or a custom ATC. Traditionalists who play mostly square faced full and pitch shots will get more from the MG5 or a conventional blade wedge.
Verdict
Hi-Toe 5 is the best version of TaylorMade's specialty wedge: forged feel finally matches the concept, spin technology is credible in wet conditions, and the grind range is genuinely useful. Its limits are the divisive look, full face grooves that stop at 54 degrees, and a best use case that is narrower than a standard wedge. Recommended, as a specialist. This is a research-based review: we analyzed specs, manufacturer data, and published independent test data; no personal testing was conducted.
What We Like
- First forged Hi-Toe: soft carbon steel construction that reviewers say clearly improves feel over prior generations
- Full face saw milled grooves on 54 to 60 degree lofts protect spin on toe strikes and open face shots
- RAW face with Spin Tread laser etched channels is designed to channel moisture and hold spin from wet lies
- Five grinds, ATS, ATV, ATX, ATW and custom ATC, cover steep, neutral and shallow deliveries
- Golf Monthly recorded over 7,600 rpm on a 50 yard pitch with the 54 degree model in early testing
What to Consider
- The tall toe, large profile will not suit traditionalists, and several reviewers found it less confidence inspiring on full swings
- Full face grooves only run on the 54 to 60 degree lofts, the 50 and 52 degree models use conventional grooves
- The low bounce ATC grind is custom and MyHi-Toe only, not available off the rack
- Raw face will patina and rust by design, which some buyers dislike, and MyHi-Toe personalization rises to $249.99
Specifications
| Key Tech | Forged soft carbon steel (first forged Hi-Toe), full face saw milled grooves on 54 to 60 degrees, RAW face with Spin Tread laser etched channels, highest CG of any TaylorMade wedge per the company |
|---|---|
| Lofts | 50, 52, 54, 56, 58 and 60 degrees |
| Grinds | ATS 9 to 10 degrees, ATV 11 degrees, ATX 12 degrees, ATW 14 degrees, ATC 8 degrees custom only |
| Shaft Options | KBS Hi-Rev 2.0 115g steel in Black PVD; UST Recoil DART 80g graphite; SuperStroke Crossline 2.0 grip |
Score Breakdown
Scores are research-based, drawn from manufacturer specs, tour adoption, and published independent test data. How we score