Orlimar · Drivers Review
Orlimar Slice Killer Driver Review
Thirty yards of slice correction, welded in, with no way to turn it down
Below Average
Tour Issue Score 6.3 · Ranked #61 of 65 in Drivers
Best for: Severe, chronic slicers who play casual golf and do not plan swing changes
The Bottom Line
Thirty yards of slice correction, welded in, with no way to turn it down. The Orlimar Slice Killer Driver scores 6.3 out of 10 in our research-based review, a below average mark that puts it at #61 of 65 Drivers in our rankings. Its strongest fit: Severe, chronic slicers who play casual golf and do not plan swing changes.
Full Review
The Short Version
The Orlimar Slice Killer is the most aggressive anti-slice driver in mainstream retail: a 460cc titanium head with a face set 7 degrees closed, an offset hosel, and a heel weighted screw, all stacked to drag the ball left. Orlimar cites independent robot testing of 29.7 yards of slice prevention, and the correction is real. The catch is everything around it. The bias is fixed and cannot be dialed back, it comes only in regular and senior flex with limited lofts, owner reports in buying guides include hooks, a heavy feel, and breakage, and the official $199.99 price buys a one-trick club a golfer can outgrow in a single lesson.
Performance
Start with what works. Multiple buying guides that aggregated robot data and owner feedback agree the Slice Killer moves ball flight left by roughly 30 yards for a genuine slicer, turning a banana ball into a fade or a draw, and titanium construction gives it better ball speed potential than the aluminum budget offset drivers it competes with. What is missing is any independent launch monitor evidence that it keeps up on distance once the ball is straightened. There is no published ball speed, carry, or spin testing from MyGolfSpy, Golf Digest, or GOLF.com for this model, and the design gives reasons for doubt: a face closed by 7 degrees presents extra effective loft when squared, and the fixed 45.5 inch shaft in only two flexes cannot be matched to faster swings. Mainstream draw drivers publish their numbers. This one publishes a single slice prevention figure and asks for trust on the rest.
Forgiveness
For its narrow target player, a chronic slicer with an out to in path and an open face, the Slice Killer is forgiving in the only sense that matters: the right side of the course largely disappears. For everyone else the forgiveness story inverts. Guides consistently warn that the same 7 degree closure over-corrects anyone whose slice is mild or improving, producing pulls and hooks, and owner summaries repeat the pattern: golfers who fixed their path, even slightly, found a driver that now missed left with no way to adjust it. An adjustable draw driver can be opened back up as a swing improves. The Slice Killer cannot. Its correction is welded in, which makes it a club with an expiration date set by the owner's first good lesson.
Feel and Sound
The black PVD finish looks the part and the titanium face feels livelier than aluminum rivals, and several owner summaries praise the sound at impact. Against that, other owners report the head feeling heavy through the swing, the pronounced offset takes real adjustment at address because the face sits visibly shut and set back, and the stock grip and shaft are basic components with no upgrade path. Quality is the darker thread: multiple buying guides summarizing owner feedback flag quality control issues, including reports of heads separating from shafts and clubs breaking after limited use, plus mixed reports on warranty support. One breakage report is an anecdote; the same warning repeated across independent roundups is a pattern a buyer should price in.
Value
The Slice Killer built its following as a cheap experiment, and at street prices under $100 that logic held. At the $199.99 now listed on Orlimar's own store, the math changes. That money is a large step toward a used or prior generation mainstream draw driver with adjustability, published test data, and resale value. A fixed bias, two flexes, limited lofts, and documented durability questions are a lot to accept at $200, and the club's resale value collapses the moment the buyer's slice improves, which is the outcome the buyer is hoping for.
Who Should Buy It
The only defensible buyer is a confirmed, severe slicer who has no plan to take lessons, plays casual golf, and finds the club at a deep discount: for that golfer, 30 yards of correction is real fairways found. Everyone else should avoid it. Golfers with a mild slice will trade a right miss for a left one. Golfers working on their swing will outgrow a fixed 7 degree closed face within a season. Faster swingers get no shaft option that fits. The better alternative, reviewed on this site, is the PING G440 SFT: a high MOI draw biased driver whose correction is adjustable, whose ball speed is independently verified, and which stays useful as your swing changes. The TaylorMade Qi4D Max makes the same point from another brand.
Verdict
The Slice Killer does the one thing it promises, and the robot figure behind that promise is consistent across sources. But a driver is more than one number. Fixed extreme bias, no adjustability, thin fitting options, repeated owner durability complaints, and a $199.99 official price against adjustable mainstream alternatives add up to a specialist tool that most slicers should rent with a lesson instead of buying. Buy the swing fix, not the mask. This is a research-based review synthesized from published reviews, independent test data, and manufacturer specifications; no personal testing was conducted.
What We Like
- Extreme, verified slice correction: Orlimar cites 29.7 yards of slice prevention from independent robot testing
- Titanium 460cc head offers better ball speed potential than aluminum budget offset drivers
- Black PVD finish and modern shaping look more premium than most budget anti-slice clubs
- Simple fixed setup with nothing to adjust or mis-set
What to Consider
- Fixed 7 degree closed face cannot be dialed back, so it over-corrects into hooks as a swing improves
- Only regular and senior flex shafts and limited lofts, with no adjustability of any kind
- Owner reports aggregated across buying guides include heads separating, breakage after limited use, and mixed warranty support
- No independent launch monitor ball speed or carry data published for the model by major test outlets
- Official store price of $199.99 approaches adjustable mainstream draw drivers that hold resale value
Specifications
| Head Size | 460cc |
|---|---|
| Construction | Titanium head, black PVD finish |
| Face Angle | 7 degrees closed with offset hosel |
| Weighting | Anti-slice heel weighted screw |
| Lofts | 10.5 and 12.5 degrees |
| Shaft | Orlimar ultralight graphite, 45.5 inches, regular and senior (Lite) flex only |
Score Breakdown
Scores are research-based, drawn from manufacturer specs, tour adoption, and published independent test data. How we score